Our Diesel Power® and MultiMotion® chip tuning additional control devices, can be easily installed and retrofitted, using the “do it yourself” process.

For all engines, whether installed in cars, trucks, buses, tractors or working machines, you will receive detailed, illustrated installation instructions.

Further information can be found in our FAQ´s and in our Info Library.

We would be happy to advise you, about the specific installation situation, on your vehicle before you purchase. Installation here directly on site is possible at any time. Also on weekends by arrangement.
Contact

A deactivation plug is included in delivery. If you want to return your vehicle to standard condition, you can replace the module with the deactivation plug. The series status is then restored.

If you still have any questions, our technical support is also available. Contact

During a visit to the workshop, our additional control devices cannot be recognized, by reading out the environmental data from the engine control unit. The standard hardware and software and the safety devices, of the engine control unit, remain in their original condition.

Nevertheless, we recommend that you remove the Diesel Power® or MultiMotion® additional control unit, before visiting the workshop in order to enable service work, based on the series vehicle.

Diesel Power® and MultiMotion® additional control units have an E1 approval (E1*10R06/02*9979*00) and can therefore be installed in motor vehicles, as an electronic subassembly. We also provide a free TÜV parts report, for many vehicle types.

OBD or flash tuning, i.e. overwriting the manufacturer's software in the engine control unit, with a tuning file, can be detected as part of service work. With every update of the engine control unit by the manufacturer, this tuning file is overwritten again and the engine control unit is back in series condition. Or the software update is refused to be installed.